One gallon epoxy primer for Gunite or Fiberglass pool surfaces. Use only with Zeron or Poxolon 2 pool paint.
Monday – Friday
Track all Orders
Bare plaster or concrete are highly absorbent materials which tend to soak up the first coat. Therefore, a primer should be used to soak in, seal the surface and provide a smoother profile for surfacing. These primers should only be used as a base coat for POXOLON 2 or ZERON. Do not use epoxy primers in conjunction with rubber-base coatings.GUNZITE is a two-part epoxy primer for application over fiberglass or unusually rough plaster or concrete.
GUNZITE is a two-part epoxy primer for application over fiberglass or unusually rough plaster or concrete. The heavy viscosity of GUNZITE acts as a fill coat on concrete and plaster and provides a much smoother surface, GUNZITE should only be used as an undercoat for POXOLON 2 or ZERON. Especially effective on sandblasted surfaces.
Coverage: 100 – 150 square feet per gallon
Free from material and manufacturer defect
WARNING: Some products can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go please visit www.p65warnings.ca.gov